User:Khamar

From Wikipedia, the free encyclopedia

Kyle Hamar[edit]

Plant Manager[1], Chemist[2], Materials Scientist, Skeptic.

I firmly support the intent of Wikipedia to bring people together on topics and work toward common goals in an open and transparent manner.

Controversy[edit]

I proudly support the work of Guerrilla Skepticism on Wikipedia, where all edits are open and transparent and secondary references are more important than your belief system on any one subject. Editors with similar interest should work together on articles. I do not edit controversial pages. Although I will be happy to help you with any article in my core subject areas - I am unlikely to join in "your cause" on a given controversy. In my opinion this is not the role of a good editor nor the purpose behind Wikipedia. Collaboration on subjects of interest for the improvement of those articles is my choice instead.

Did you know? contributions:[edit]

Steven Novella

New articles[edit]

Important tips and articles[edit]

User:Khamar/FAQ

Did you know? nominations:[edit]

Significant expansions:[edit]

Early work[edit]

Graduate research at Tulane University included laser photo-kinetics of group I elements[3] and semiconductor precursor materials.[4][5][6]

Early career[edit]

  • Supervisor, Texas Instruments Silicon Engineering Technology Center.
  • Supervisor and Manager at Ashland Specialty Chemical.
  • Site Manager for Houghton Fluidcare

Current[edit]

Plant Manager, Kanto Corporation.

Recent professional focus has involved process safety and associated regulations.

29 CFR Department of Labor/Occupational Safety and Health Administration
40 CFR Environmental Protection Agency
49 CFR Department of Transportation/National Transportation Safety Board
State and Local Codes (varies)
National Standards
API American Petroleum Institute
ASHRAE American Society of Heating, Refrigerating and Air Conditioning Engineers
ASME American Society of Mechanical Engineers
NFPA National Fire Protection Association
NIOSH National Institute for Occupational Safety and Health
OSHA Occupational Safety and Health Administration
Recognized and Generally Accepted Good Engineering Practices (REGAGEP)
This may include other code requirements and or good Engineering (best practices) considerations not mentioned above.
All manufacturers’ written instructions, requirements, and recommendations.

Tools I like on WP[edit]

Useful wiki-related pages[edit]

Useful wiki-related templates[edit]

I use this as a scratch area to drop bits of wiki markup. Sometimes this section is blank or sparsely populated...

..

ZAP!No user-serviceable parts inside.
CabalMember of the Secret Cabal.
Community Position
This user was manually confirmed prior to meeting the autoconfirmation requirements. (verify)
Editing Skill WikiMedia Commons
wiki-2This user is an intermediate Wikipedia editor.


Subscriptions[edit]

Tomorrow's featured article

SMS Lothringen

SMS Lothringen was the last of five pre-dreadnought battleships of the Braunschweig class built for the Imperial German Navy. Launched in May 1904, she was named for the then-German province of Lothringen. The ship was armed with a battery of four 28 cm (11 in) guns and had a top speed of 18 knots (33 km/h; 21 mph). She was to be replaced in July 1914 by dreadnought battleships but World War I prevented her retirement. The ship and the rest of II Squadron joined the dreadnoughts of the High Seas Fleet to support a raid on Scarborough, Hartlepool, and Whitby in December 1914. She primarily served as a guard ship in the German Bight; in poor condition by 1916, she was withdrawn from fleet service in February. She thereafter patrolled the Danish straits until replaced by the battleship Hannover in September 1917. After the war, she was converted into a depot ship for F-type minesweepers and placed in reserve in March 1920. (This article is part of a featured topic: Battleships of Germany.)


References[edit]

  1. ^ "Kanto Corporation". Kanto Corporation. Retrieved 8 July 2014.
  2. ^ "MS Degrees Awarded". Tulane University. Retrieved 8 July 2014.
  3. ^ Panayotov, Valentin; Hamar, Kyle; Red, Clarence; Birdwhistell, Teresa L. T.; Koplitz, Brent (1998-05-01). "Selective ionization of group I elements from laser ablated plumes of Rb⋅Ga⋅Sb,K3Ga3As4, and K4In4As6". Journal of Applied Physics. 83 (9): 4974–4979. doi:10.1063/1.367300. ISSN 0021-8979.
  4. ^ Panayotov, Valentin G.; Hamar, Kyle; Birdwhistell, Teresa L. T.; Koplitz, Brent D. (1995-01-01). "III-V semiconductor thin films via laser ablation/ionization of I-III-V Zintl-phase materials". 2547: 328–341. doi:10.1117/12.221486. {{cite journal}}: Cite journal requires |journal= (help)
  5. ^ Koplitz, Brent D.; Panayotov, Valentin G.; Hamar, Kyle; Birdwhistell, Kurt; Koplitz, Lynn V.; Birdwhistell, Teresa L. T.; Xu, Xiaodong; Deshmukh, Subhash; Brum, Jeffrey L. (1993-01-01). "Using lasers to understand and control the chemistry of semiconductor-related precursors". 1804: 79–86. doi:10.1117/12.142079. {{cite journal}}: Cite journal requires |journal= (help)
  6. ^ Panayotov, Valentin; Hamar, Kyle; Birdwhistell, Teresa L. T.; Red, Clarence; Dillon, Jennifer; Dennison, David; Barnes, Anthony P.; Koplitz, Brent (1995-04-24). "Selective removal of potassium from K4In4Sb6 via laser ablation/ionization". Applied Physics Letters. 66 (17): 2241–2243. doi:10.1063/1.113179. ISSN 0003-6951.